|
The EXTEC ® Labcut 150 Variable Speed Precision Diamond Saw is an attractive, modern styled laboratory instrument designed for precision cutting of a wide variety of materials. Samples can be cut with minimal damage and deformation. The universal design and variable speed aid the precision cutting of fragile and soft materials. Variable wheel rotation speeds range from 0 to 1000 rpm. A variety of sample holders add to the 150’s versatility. This includes the Rapidcut Precision Attachment which reduces cutting time and results in a high quality surface finish.
The Labcut 150 is ruggedly constructed from a cast-aluminum frame with stainless steel components providing stability and corrosion resistance in a molded water resistant cabinet. The EZ-DRO™ Easy Keypad operates the powerful belt driven AC 1/4 HP motor with inverter. The sample arm is pivoted and can be counterbalanced to provide low loading conditions on the specimen. It features 25mm micrometer movement that allows positioning of the sample with respect to the wheel.
The Recirculating Coolant System consists of a coolant reservoir with an adjustable power supply, liquid recirculation pump, twin coolant tubes, stainless perforated tray, sample retrieval tweezers and sump drain tool. The system provides adequate coolant flow to the twin coolant tubes located on either side of the cutting wheel. The Recirculating Coolant System accepts EXTEC cutting fluids.
The Labcut 150 will accept 3 inch* (75mm), 4 inch (100mm), 5 inch (125mm) and 6 inch (150mm) diameter diamond wafering blades and abrasive cut-off wheels. A transparent polycarbonate splash/safety shield with an integrated safety switch is fitted to prevent operation when the shield is open. An endpoint microswitch indicator can be set to terminate the cutting process at a predetermined depth.
An optional sample rotation attachment (model 1000-100) is available featuring a modified sample arm with a motor drive and variable speed controller
which help to eliminate blips and reduces cutting time.
*3 inch (75mm) requires set of optional flanges
Features
- Accepts 3 inch (75mm) , 4 inch (100mm), 5 inch (125mm) and 6 inch Wheels and Blades
- Variable wheel rotation speeds range from 0 to 1000 rpm
- EZ-DRO™ Easy Keypad
- Powerful Belt Driven AC 1/4 HP Motor with Inverter
- Designed for Stability and Corrosion Resistance
- Pivoted Specimen Arm with 25mm Micrometer Movement
- Transparent Polycarbonate Splash/Safety Shield
- Recirculating Coolant System
- Adjustable Power Supply
- Liquid Recirculation Pump
- Twin Coolant Tubes
- Stainless Perforated Tray
 
A P P L I C A T I O N S |
| Materials: |
Slicing samples of metals, alloys, composites. |
| Ceramics: |
Slicing samples of ceramics. |
| Semiconductor: |
Cutting semiconductor crystals and sectioning embedded devices. |
| Pathology: |
Cutting bone and teeth material and preparing thin sections. Cutting embedded tissue. |
| General Physics: |
Mounting and slicing single crystals along a particular axis. |
| Geology: |
Preparing mineralogical sections of rocks. |
| Paleontology: |
Preparing sections of fossils in rocks. |
 
S P E C I F I C A T I O N S |
| Spindle: |
Stainless Steel ½ inch (12.7mm) diameter with standard flanges, belt driven. |
| Motor: |
1/4HP (0.18kW) 100-115 volt or 220-240 volt |
| Wheel Speed: |
EZ-DRO™ Easy Keypad Range 0 to 1000 rpm |
| Wheel Size: |
3* inch (75mm), 4 inch (100mm), 5 inch (125mm), 6 inch (150mm)
*3 inch (75mm) requires set of optional flanges. |
| Speed Display: |
Speed displayed digitally on front panel EZ-DRO keypad. Range 0-1000rpm |
| Sample Holder: |
Counter balanced pivoting arm, variety of sample holders can be attached |
| End Point: |
Microswitch for stopping the cutting process at a preset depth. |
| Micrometer: |
0-25 mm (>1 inch) 0.01mm (< .0040 inch) |
| Recirculating Coolant System: |
Stainless steel perforated tray, power supply, adjustable coolant pump, twin coolant tubes, sample retrieval tweezers, RCS drain tool |
| Safety Shield: |
Polycarbonate Splash/Safety Shield with magnetic integrated safety switch |
| Dimensions: |
Width: 12” (300mm)
Height: 8”* (200mm)
Depth: 16” (400mm)
Main Body Height: 8” (208mm)
|
| Weight: |
40lbs (18kg) |
| O R D E R I N G I N F O R M A T I O N |
CATALOG
NUMBER |
DESCRIPTION |
| 10150 |
EXTEC LABCUT 150 Variable Speed, 3" - 6", includes: 10015 Screw Holder for irregular samples, set of 3 weights, tools and digital rpm indicator, 10153 splash guard and 12050 cutting fluid. |
| 10015 |
EXTEC Screw Holder for Irregular Samples |
| 10020 |
EXTEC V-Block Holder Small |
| 10022 |
EXTEC V-Block Holder Large |
| 10024 |
EXTEC Double Clamp Holder |
| 10026 |
EXTEC 1" to 1/4" (25-35mm) Cylindrical Holder |
| 10028 |
EXTEC Ceramic Disc Holder with 3 Discs |
| 10030 |
EXTEC Mounting Plate 1 1/2" x 1" (38mm x 25mm) |
| 10031 |
EXTEC Mounting Plate 1 1/2" (38mm) dia. |
| 10032 |
EXTEC Mounting Plate 1" (25mm) dia. |
| 10034 |
EXTEC Mounting Stubs 3/4" (19mm) dia. Pkg/5 |
| 10035 |
EXTEC PCB Holder |
| 10040 |
EXTEC Rotational Holder |
| 10041 |
EXTEC Flange Set F/3" Wheel (10010 series requires special coolant tray 10052) |
| 10047 NEW! |
EXTEC Vacuum Chuck Complete with Vacuum Pump |
| 10048 |
EXTEC Vacuum Chuck (requires Vacuum Pump, see 10049 EXTEC Vacuum Pump) |
| 10049 |
EXTEC Vacuum Pump F/10048 EXTEC Vacuum Chuck |
| 10050 |
EXTEC Rapidcut Precision Attachment |
| 10052 |
EXTEC Special Coolant Tray |
| 10053 |
EXTEC Splash Safety Shield |
|
)
