|
EXTEC Cold Mounting Systems are preferred when speed and ease are desired, especially for high volume production. They are recommended for samples that are damaged by heat and pressure treatment. Filler Powders, Liquid Additives and Release Agents are available. Five minutes to eight hour curing cycles. Order from a complete selection of EXTEC Clips, Circuit Board Holders, PCB Coupon Pins, MIxing and Mounting Cups, Cement, Stirrers, Sample Holders and Glass Plates.
EXTEC Fast Cure Epoxy is a low viscosity, two component, clear, chemical resistant casting resin that gels at room temperature. It exhibits low shrinkage and superior adhesion.
EXTEC Flow Epoxy is a thin, slow gelling, low viscosity, two component system, clear and chemically resistant for casting particularly fragile, intricate specimens.
EXTEC Crimson Epoxy is a red in color, two component castable system recommended for samples requiring a definitive viewing background.
EXTEC Red, Yellow, Blue Color Concentrate and Black Liquid are available for use with EXTEC Epoxies. A 2:100 ratio up to 5:100 ratio is recommended to obtain desired intensity of color.
EXTEC Fast Cure Acrylic is a fast curing, translucent, two component casting system. Characterized by an unusually high standard of adhesion exhibiting low shrinkage and good flow characteristics.
EXTEC Red, Yellow and Blue Color Concentrate Powders are compatible only with Extec's Fast Cure Acrylic Powder. A 1:1 ratio of Extec Concentrate Powder to Extec's Fast Cure Acrylic Powder results in a sample of mid-range color in either Red, Yellow or Blue.
EXTEC Ultra Clear Fast Cure Acrylic System is a fast curing clear, two component casting system. Characterized by an unusually high standard of adhesion exhibiting low shrinkage and good flow characteristics when encapsulating particularly intricate specimens.
EXTEC High Hardness Fast Cure Acrylic is a high hardness fast curing translucent, two component casting system. Characterized by an unusually high standard of adhesion exhibiting low shrinkage and good flow characteristics.
EXTEC Polyester is a clear, two component casting resin that gels at room temperature.
Look for NEW! next to an item number for recently added products.
 
 Indicates Special Packaging Required
| CATALOG NUMBER |
DESCRIPTION |
UNIT |
| EXTEC Sample Clips & Accessories |
| 14650 |
EXTEC SS Stainless Steel Clip |
Pkg/100 |
| 14651 |
EXTEC OP O-Plastic Clip |
Pkg/100 |
| 14653 |
EXTEC T Triclip |
Pkg/100 |
| 14655 |
EXTEC C Plastic Clip |
Pkg/100 |
 |
| 14877 |
EXTEC Circuit Board Holder |
Pkg/10 |
| 14884 |
EXTEC Angle Polishing Inserts |
Pkg/10 |
| 14830 |
EXTEC Stirring Sticks |
Pkg/100 |
| 14831 |
EXTEC Sample Savers for 1 1/4" (31.75 mm) |
Pkg/20 |
| 14832 NEW! |
EXTEC PCB Coupon Pins |
Pkg/100 |
| EXTEC Graduated Cups |
| 14833 |
5 oz (150 ml) |
Pkg/100 |
| 14835 |
5 oz (150 ml) |
Pkg/500 |
| 14837 |
5 oz (150 ml) |
Pkg/1000 |
| EXTEC Fast Mounting Cups |
| 14855 |
EXTEC Fast Mounting Cups 1 1/4" (31.75 mm) |
Pkg/10 |
| EXTEC Rubber Reusable Mounting Cups |
| 14856 |
1" (25.4 mm) |
Pkg/5 |
| 14857 |
1 1/4" (31.75 mm) |
Pkg/5 |
| 14858 |
1 1/2" (38.10 mm) |
Pkg/5 |
| 14859 |
2" (50.8 mm) |
Pkg/5 |
| 14860 |
2 1/2" (63.5 mm) |
Pkg/5 |
| EXTEC Rubber Reusable Rectangular Mounting Cups |
| 14861 |
2.2" x 1.2" x 0.9" (55 mm x 30 mm 22 mm) |
Each |
| 14862 |
2.8" x 1.6" x 0.9" (70 mm x 40 mm x 22 mm) |
Each |
Top
| CATALOG NUMBER |
DESCRIPTION |
UNIT |
| EXTEC Ring Molds, Phenolic |
| 14750 |
1 1/4" (31.75 mm) |
Pkg/10 |
| 14760 |
1 1/2" (38.10 mm) |
Pkg/10 |
| 14770 |
2" (50.8 mm) |
Pkg/10 |
| EXTEC Ring Molds, Thermal Glass |
| 14813 |
1 1/4" (31.75 mm) discontinued |
Pkg/10 |
| 14823 |
1 1/2" (38.10 mm) discontinued |
Pkg/10 |
| EXTEC Mounting Cement |
| 17950 |
EXTEC Lakeside 70 Mounting Cement |
Pkg/10 |
| 17960 |
EXTEC Balsam Neutral |
4 oz (.12 l) |
| 17962 |
EXTEC Balsam Neutral |
1 lb (.45 kg) |
| EXTEC Glass Plate |
| 14850 |
5" x 7" (128 mm x 178 mm) |
Each |
| 14852 |
5" x 7" (128 mm x 178 mm) |
Pkg/10 |
Top
| CATALOG NUMBER |
DESCRIPTION |
UNIT |
| EXTEC Epoxy |
| 14702 |
A-Mount 2 Part Pak discontinued, see alternates 14729 / 14732 |
Pkg/10 |
| EXTEC Fast Cure Epoxy |
| 14705 |
Kit, Resin qt (.95 l); Hardener 1/2 pt (.24 l), EXTEC Release Agent 2 oz (60 ml), 1 box of 10 EXTEC Fast Mounting Cups, Stirring Stick, and Graduated Paper Cups. |
Kit |
| 14707 |
Combination Pkg: Resin gal (3.8 l), Hardener qt (.95 l) |
Pkg |
| 14729 |
Resin |
qt (.95 l) |
| 14732 |
Hardener |
1/2 pt (.24 l) |
| 14730 |
Resin |
gal (3.8 l) |
| 14733 |
Hardener |
qt (.95 l) |
| EXTEC Flow Epoxy |
| 14735 |
Kit, Resin qt (.95 l), Kit; Hardener 11 oz.  (.33 l), EXTEC Release Agent 2 oz (60 ml), 1 box of 10 EXTEC Fast Mounting Cups, Stirring Stick, and Graduated Paper Cups. |
Kit |
| 14736 |
Combination Pkg: Resin gal (3.8 l), Hardener qt. 44 oz. (1.30 l) |
Pkg |
| 14734 |
Resin |
qt (.95 l) |
| 14739 |
Hardener |
11 oz (.33 l) |
| 14737 |
Resin |
gal (3.8 l) |
| 14738 |
Hardener |
44 oz. (1.30 l) |
| EXTEC Crimson Epoxy |
| 14703 |
Resin |
qt (.95 l) |
| 14704 |
Hardener |
1/2 pt (.24 l) |
| EXTEC Filler Powders |
| 14890 |
EXTEC Fluorescent Additive Powder |
4 oz (.12 l) |
| 14891 |
EXTEC Alumina Mounting Filler |
1 lb (.45 kg) |
Top
| CATALOG NUMBER |
DESCRIPTION |
UNIT |
| EXTEC Color Concentrate Liquid |
| 14910 |
Extec Epoxy Red Color Concentrate |
6 oz. (.18 l) |
| 14912 |
Extec Epoxy Yellow Color Concentrate |
6 oz. (.18 l) |
| 14914 |
Extec Epoxy Blue Color Concentrate |
6 oz. (.18 l) |
| 14916 |
Extec Epoxy Black Color Concentrate |
6 oz. (.18 l) |
Top
| CATALOG NUMBER |
DESCRIPTION |
UNIT |
| EXTEC Fast Cure Acrylic |
| 14545 |
Kit, Powder 1 lb (.45 kg), Liquid 12 oz (.36 l) Scoop, Stirring Sticks and Graduated Paper Cups |
Kit |
| 14550 |
Powder |
1 lb (.45 kg) |
| 14555 |
Liquid |
12 oz (.36 l) |
| 14560 |
Powder |
5 lb (2.3 kg) |
| 14565 |
Liquid |
64 oz (1.9 l) |
| 14561 |
Powder |
5 pk 25 lb (11.5 kg) |
| 14566 |
Liquid |
5 pk 320 oz (9.5 l) |
| 14562 |
Powder |
10 pk 50 lb (23 kg) |
| 14567 |
Liquid |
10 pk 640 oz (19 l) |
| EXTEC Color Concentrate Powder |
| 14901 |
Red Concentrate Powder for 14550 discontinued |
1 lb. (.45 kg) |
| 14902 |
Red Concentrate Powder for 14560 discontinued |
5 lb. (2.3 kg) |
| 14903 |
Yellow Concentrate Powder for 14550 discontinued |
1 lb. (.45 kg) |
| 14904 |
Yellow Concentrate Powder for 14560 discontinued |
5 lb. (2.3 kg) |
| 14905 |
Blue Concentrate Powder for 14550 discontinued |
1 lb. (.45 kg) |
| 14906 |
Blue Concentrate Powder for 14560 discontinued |
5 lb. (2.3 kg) |
| EXTEC Ultra Clear Fast Cure Acrylic |
| 14570 |
Kit, Powder 1 lb (.45 kg), Liquid 12 oz (.36 l) Scoop, Stirring Sticks and Graduated Paper Cups |
Kit |
| 14572 |
Powder |
1 lb (.45 kg) |
| 14574 |
Liquid |
12 oz (.36 l) |
| 14576 |
Powder |
5 lb (2.3 kg) |
| 14578 |
Liquid |
64 oz (1.9 l) |
Top
| CATALOG NUMBER |
DESCRIPTION |
UNIT |
| EXTEC High Hardness Fast Cure Acrylic |
| 14580 |
Kit, Powder 1 lb (.45 kg), Liquid 12 oz (.36 l) Scoop Stirring Sticks and Graduated Paper Cups |
Kit |
| 14582 |
Powder |
1 lb (.45 kg) |
| 14584 |
Liquid |
12 oz (.36 l) |
| 14586 |
Powder |
5 lb (2.3 kg) |
| 14588 |
Liquid |
64 oz (1.9 l) |
| 14590 |
Powder |
5 pk 25 lb (11.5 kg) |
| 14592 |
Liquid |
5 pk 320 oz (9.5 l) |
| 14594 |
Powder |
10 pk 50 lb (23 kg) |
| 14596 |
Liquid |
10 pk 640 oz (19 l) |
| EXTEC Polyester |
| 14675 |
Clear Resin |
qt (.95 l) |
| 14685 |
Clear Hardener |
2 unit |
| 14677 |
Clear Resin |
gal (3.8 l) |
| 14687 |
Clear Hardener |
9 unit |
| EXTEC Release Agent |
| 14863 |
Liquid |
8 oz., 1/2 pint |
| 14864 |
Liquid |
16oz., 1 pint |
| 14865 |
Liquid |
32 oz., 1 qt |
|
| 14890 |
EXTEC Fluorescent Additive Powder |
4 oz. (.12 l) |
| 14891 |
EXTEC Alumina Mounting Filler |
1 lb. (.45 l) |
| 14893 |
EXTEC Polyester Liquid Dye Additive- Red, Yellow, Blue |
Pkg/3 4 oz. 120 cc) |
Indicates Special Packaging Required
|
)
