|
)  |
||
 |
|||
| A to Z Index | Request a Quote | Picture Zoom | ||
|
|||
Extec Labpro 1 Proportioning - Metering System is a convenient and accurate method of dispensing epoxy two-component resin systems. The patented ratio mechanism allows a partial machine stroke while holding ratio accuracy from 1:1 to 100:1
Features:
- Meter and dispense any two component epoxy, urethane, or silicone
- Pull the handle and dispense only as much as you need, exactly with precise mix ratio
- Eliminates hand weighing
- Improves quality control by eliminating guesswork and human error out of process
- Economical allows purchasing material in bulk rather then expensive cartridges
- Wide mix ratio from 1:1 to 100:5
- Easy adjust mix ratio with our patented slider scale
- Heated tank option available for thick materials and cold factories
- Compact bench top size
- Robust industrial design
S P E C I F I C A T I O N S |
||
| Material Viscosity: | No minimum viscosity, maximum viscosity (around 50,000 cps) basically any pourable or self-leveling liquid. Also some thicker materials and pastes can be used, consult factory. |
|
| Shot Size Range: | Minimum shot approximately 6-8 cc. (Depending on ratio) Maximum shot approximately 60cc (approximately 32cc per piston on full stroke) Dispense infinite amount by using multiple strokes. |
|
| Shot Time: | Up to 10 shots/minute. Average approximately 4-6 shots/minute. This depends on material viscosity, shot size, and operator experience. |
|
| Shot cycle Initiate: | Manual lever pull system | |
| Dispense and Ratio Accuracy: | Plus or minus 1% to 5% | |
| Dispensing System: | Highly Accurate Positive displacement pump. | |
| Reservoir Capacity: | 2 Quart (1.89 liters) each resin and hardener tanks standard. External 1 to 16 Gallons (3.79 to 60.6 liters) gallon tanks option. Heaters are available. |
|
| Dispensing of Filled and/or Abrasive Material: | Some filled materials can be used, consult factory. | |
| Heated Tank: | Heated tank option available. Keeps material in tanks at constant 120°F (49°C). | |
| Power Requirements: | Manual operation, no air or electric needed. For heater option 115 VAC at 5 amps or 220 VAC at 2.5 amps required. |
|
| Dimensions: | Base footprint = 12 inch (305mm) Width x 12.5 inch (318mm) Length x 8 inch (203mm) Ht | |
| Weight: | 18 lbs (8.17 kg) | |
| Approvals: | CE, RoHS, WEEE | |
| O R D E R I N G I N F O R M A T I O N | |
| CATALOG NUMBER |
DESCRIPTION |
| LABPRO1 | Extec Labpro 1 Proportioning - Metering System |
| Related Products | ||
|
||
|
 |
|
|
||